Model: SC-6000 
Function: The device is designed to study the precipitation of scale deposits in dynamic mode under high pressure and high temperature conditions. The device is used to study the effectiveness of chemical inhibitors to prevent the formation of mineral scales (carbonate and sulfate deposits); to determine the minimum inhibitor concentration (MIC) required to prevent salt deposits; for the inhibition of the same conditions under the same conditions on the inhibition of the system utilizes the generally accepted principle of pipeline obstruction test, at a constant temperature to determine the minimum concentration of inhibitors under dynamic flow conditions.
Main Technical Parameters.
1. experimental maximum temperature: at least 150°C
2. maximum test pressure: at least 20 MPa
3. presence of a safety valve for emergency pressure relief; and
4. the presence of a pressure sensor
5. HPLC pumps (advection pumps) for liquid and reagent supply: at least 3.
6. maximum total fluid flow (for all pumps): at least 30 ml/min (this requirement is due to the need to pump 5-10 liters of solution during the working day, taking into account the time required to prepare the installation for start-up as well as measures for stopping, relieving pressure, and cleaning);; and
7. Test tubes must be of corrosion-resistant design; (OD 1/16, C276, 1 meter long coiled tubing)
8. Power consumption: not more than 3000 watts.
9. Availability of specialized software for installation management, collection and processing of relevant experimental information. 
10. Power supply voltage: 220±10%V/50Hz.